- Used Equipment
- Land Pride
- Bush Hog
- Construction Attachments Inc.
- Paladin Attachments
- Curtis Industries
- Taylor Pittsburgh
- Tiger Mowers
- Latest Offers
- Company Profile
- Contact Us
3266 E. Bristol Rd.
Burton, MI 48529
Bush Hog DSP10
Double tap to zoom
Pull Dirt Scrapers DSP8, DSP10 Series DSP10
Bush Hog’s new DSP Line of Pull-Type Drag Scrapers, with standard fixed axle or optional tilt axle, is ideal for moving large quantities of material, leveling, and finish grading. The DSP units come available in 8’, 10’ and 12’ widths. DSP scrapers equipped with the optional tilt axle can do everything the standard axle does, as well as remove material on an angle for sloping, terracing and ditching. Material can be transferred by dragging it to nearby locations and raising the scraper to deposit the load. Surfaces can be graded and leveled by scraping material from high areas and allowing accumulated material to flow under the grader blade into lower areas. The DSP scrapers are designed for 70 to 125 horsepower tractors and have replaceable wear plates on the sides. - Less
Bush Hog’s new DSP Line of Pull-Type Drag Scrapers, with standard fixed axle or optional tilt axle, is ideal for moving large quantities of material, leveling, and finish grading. The DSP units come available in 8’, 10’ and 12’ widths. DSP scrapers equipped with the optional tilt axle can do everything the standard axl... + Read More
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Share This Product:
- Available in 8-feet and 10-feet widths.
- Optional tilt axle removes material on an angle for sloping, terracing and ditching.
- DSP scrapers are designed for 70 to 125 horsepower tractors
- Replaceable wear plates on the sides.
|Horsepower Rating||70 to 125|
|Working Width||120 3/16-inches|
|Capacity||2 1/4 cu. yds.|
|Weight without material in Weight Box|
|No Tilt Axle||1525-lb|
|Weight of Material in Weight Box||760-lb|
|Depth of Box||39-inches|
|Maximum Cutting Depth||5-inches below grade|
|Maximum Tilt Depth To the Right||7 5/8-inches|
|Maximum Tilt angle||3 1/2°|
|Tongue Construction||4-inches x 4-inches x 1/4-inch tubing|
|Side Plate Construction||3/8-inch x 24 5/16-inches high x 39 3/4inches deep|
|Moldboard Construction||1/4-inch x 24 1/4-inches high when formed|
|Cutting Edge||1/2-inch x 6-inches reversible & replaceable|
|Cutting Edge Reinforcement||3-inches x 3-inches x 5/16-inch angle plus a 1/4-inch mold board = 9/16-inch at the cutting edge.|
|Tires||New 9.5l x 15 8 PLY RIB TL on Rim 5 with 5.5 BHC|
|Maximum Transport Speed||20 MPH|
|Lift Cylinder||3 1/2-inches x 8-inches ASAE|
|Tilt Cylinder||3 1/2-inches x 8-inches ASAE|
© Copyright 2012 - 2023 Site by: AM EquipmentLocator.com
GOT A QUESTION?
Let us help you get moving.