Kubota BV5160R

Double tap to zoom

 

Features

SuperCut-14 Knife Rotor (SC-14 Model)

The SuperCut-14 version of BV5160 is the ideal solution for silage applications. The 14 knife chopping system provides a fast and efficient flow into the baler. With a chopping length of 2.75" it is the ideal solution for producing dense and airtight bales. Also, the bale is easier to break up during the feeding process.

Control Terminal

The ISOGO Terminal is a universal ISO control terminal which can also be used with other Kubota implements. It gives you full control of all functions from the tractor cab and is shown on a large and very clear digital display. The ISOGO terminal monitors and controls all necessary functions with all relevant parameters/ information visible at a glance. The control box is also driving the binding automatically without any intervention from the operator.

Twine Tying

Automatic twine tying with the fast acting double tube system means simultaneous binding of both edges of the bale, keeping binding time to a minimum. Over crossing of twines in the center of the bale provides no loose ends at the end of the binding cycle.

PowerBind Net Wrap

These balers come with Kubota's patented PowerBind net wrap system. This technology has allowed Kubota to get away from the old feed rollers and eliminate many high wear items. The net is fed directly into the bale chambers by injection plates. This design keeps the net tight at all times, which provides accurate and extremely reliable net injection.  In addition, the PowerBind net system is extremely simple with a very low loading height (no tools required).

Intelligent Density 3D

The Intelligent Density 3D bale chamber offers a combination of 3 rollers and 5 endless belts, giving it the ability to set the density of the bale in three different zones. The two aggressive front rollers that come in contact with the crop are constantly cleaned by scrapers and are designed to perform well in wet silage. They ensure instant and efficient bale start with immediate bale formation in all crop conditions.

Drop Floor for Easy Unblocking

The Kubota drop floor enables the operator to clear blockages easily from the tractor cab without any crop loss. Drop the floor and free the rotor blockage, engage the PTO to feed the blockage through and close the floor to continue baling. This standard feature reduces downtime and helps increase productivity.

High Performance Pick-Up and Intake

On Kubota's BV5160, the load on the tine bars is minimized by using two intermediate supports and two separate cam tracks located at either end of the pick-up. Slip clutch protection comes standard. A roller wind guard is fitted on rotor intake models which pre-compresses the crop, further boosting intake performance. The working width on the BV5160 is 86".

Specifications

Specifications
Length in.Length in.176"
Width in.Width in.99"
Height in.Height in.106"
Weight lbs. (kg)Weight lbs. (kg)7165 / 6965
Diameter Min in.Diameter Min in.24"
Diameter Max in.Diameter Max in.65"
Bale Width in.Bale Width in.47"
Bale Height in.Bale Height in.60"
Bale FormationBale Formation5 Belts + 3 Rollers
Endless BeltsEndless BeltsStandard
Bale RampBale RampStandard
Working Width in.Working Width in.86"
Number of Tine RowsNumber of Tine Rows5
Tine Spacing in.Tine Spacing in.2.36"
WindguardWindguardRoller wind guard
Pneumatic Gauge WheelPneumatic Gauge WheelStandard
Flare to Flare PickupFlare to Flare Pickup86"
LiftLiftHydraulic
Pickup ProtectionPickup ProtectionRadial Clutch
Fork FeederFork FeederN/A
Protection, Cam ClutchProtection, Cam ClutchN/A
SuperCut-14 KnivesSuperCut-14 KnivesStandard
Single Knife ProtectionSingle Knife ProtectionStandard
Unblocking SystemUnblocking SystemDrop floor
1 Main Chain1 Main Chain1.25"
1 1/4" Main Drive Chain1 1/4" Main Drive ChainStandard
Wide Angle PTO ShaftWide Angle PTO ShaftStandard
Shear Bolt ProtectionShear Bolt ProtectionN/A
Cam Clutch ProtectionCam Clutch ProtectionStandard
BindingBindingNet / Twine
MonitorMonitorFocus
TwineTwineDouble Arm / NA
ISOBUSISOBUSStandard
Focus TerminalFocus TerminalStandard
IsoMatch TellusIsoMatch TellusOptional
Hydraulic OutletsHydraulic Outlets1SA + 1DA
Wheels and Axles | 11.5/80-15Wheels and Axles | 11.5/80-15N/A
Wheels and Axles | 15.0/55-17Wheels and Axles | 15.0/55-17Standard
Wheels and Axles | 19.0/45-17Wheels and Axles | 19.0/45-17Optional
Wheels and Axles | 500/45-22.5Wheels and Axles | 500/45-22.5Optional
PTO rpmPTO rpm540CV
PTO ProtectionPTO ProtectionCamClutch
Minimum PTO Horsepower Required HP/KWMinimum PTO Horsepower Required HP/KW75

Michigan Directory - Michigan Lookup is the #1 Michigan business directory.